At Phoenix-Mesa Gateway Airport in Mesa, Arizona, Flight Test Aircraft 4 (FTA-4) once again donned its black mask to continue with extreme temperature tests. FTA-4 was deployed in August and spent multiple days in the Arizona heat operating in a maximum temperature of 42° C, or 108° F. Engineers collected data that will be used to further validate the performance of the aircraft's Environmental Control System (ECS), hydraulics system and powerplant.
As new government regulations call for more environmentally friendly aircraft, aerodynamics will play a key role in how airlines build their fleets for the future. Powered by its advanced aerodynamic design, the MRJ’s best-in-class fuel efficiency and lower emissions make it fit for the future.
The Japan Civil Aviation Bureau performed four familiarization flights aboard the Mitsubishi Regional Jet between August 5th and 7th at Moses Lake Flight Test Center. During the course of three days with clear skies and warm temperatures, flights were conducted in airspace near Grant County International Airport and three JCAB pilots took turns piloting FTA-4.
At the Moses Lake Flight Test Center in Washington, FTA-4 underwent cargo smoke testing between April 7 and April 22, 2017. To set up the test, engineers at Moses Lake installed a smoke machine and flexible hoses inside the cabin, along with lights, smoke detectors, and cameras to monitor real-time smoke generation. During the test, the hoses that were routed under the floor of the aircraft pushed smoke towards the test areas in the cargo compartment and the amount of smoke was controlled using the video cameras.
This year’s Paris Air Show marked the official debut of the Mitsubishi Regional Jet.While at the show, we spoke with MRJ program test pilots Captain Martin Trout and Captain Yoshiyuki Yasumura inside the flight deck and cabin of the MRJ as they shared details about the aircraft’s flying experience, performance attributes and benefits to airline customers.
The Mitsubishi Regional Jet touched down in France 5:05pm local time Thursday June 15 at Le Bourget Airport for the 52nd Paris Air Show. As part of the preparations for this landmark air show, we went through the meticulous process of painting the All Nippon Airways livery on the MRJ’s third flight test aircraft debuting at the air show this week. ANA, one of the largest airlines in Japan, is the MRJ’s first customer and has placed orders for 15 MRJs.
During the flight load survey tests, more than 250 pressure sensors and strain gauges affixed to the aircraft measured the maximum loads on its external surfaces and components. Throughout the test flights, the crew maneuvered the aircraft to reach specified G-loads, maximum rudder deflection, and roll and side slip thresholds as our engineers monitored the data and Japanese aviation authorities witnessed and approved the test via the telemetry room.